Steel Pipe Piling 

ESC is able to produce a large range of pipe piles of up to 4,267mm diameter and 100mm thickness. It's manufacturing capabilities for steel pipes include LSAW, SSAW and ERW processes.

ESC has recently delivered in 2015 it's longest pipe pile to date of 65m length, where it was successfully delivered and installed off a 50m high crane in an offshore application. Another recent order of pipe has a record of 120 metric tons per piece.

 

Within ESC's steel pipe range are dredging pipes, riser pipes and chemical transmission pipes. All conform to relevant international design and quality standards

Deep foundations are utilised when the soils in the shallow region do not have the strength to support the loads from the structure. Pipe piles are frequently used in deep foundations and transfer the loads from building to stronger soil layers found deep underground. The surface loads are resisted through skin friction and point bearing of the pile. The pipe piles can be driven with open or closed ends, with points or plates. If driven with plates, the pipes can then be filled with rebar and concrete to boost the strength to the pile. Pipe piles range in size from several millimetres to several metres in diameter and can be easily spliced to create piles over 100 metres in length.

Using 3 manufacturing processes, ESC can supply pipes between 21mm up to 4267mm in diameter at thicknesses between 2.1mm up to 100mm. These include LSAW pipe, SSAW spiral pipe and ERW pipe. A wide range of steel grades. ESC has delivered many thousands of tons of pipe piling around the world.

Product Case Studies

New Orleans, USA
Port of Texas, USA
Cruise Ship Dock, Dominican Republic
Grain Export Terminal, USA
Cruise Line Terminal, Dominican Republic 1
Louisiana Load Out Jetty, USA
Show More
 

Manufacturing Processes

Longitudinal Submerged Arc Welded LSAW Pipe

LSAW Pipes are formed by rolling a discrete length into a cylinder and welding it both longitudinally and laterally. This method can produce the largest and thickest pipe sections, which can be used as load bearing piles, combination wall piles or other applications.

Spiral Submerged Arc Welded SSAW Pipe

SSAW Pipe are formed in a spiral and welded both inside and outside continuously. They are typically used as King Piles for Combination Walls and also Dredging Pipe.

Electric Resistance Welded ERW Pipe

ERW Pipes are manufactured by rolling the raw plate into a cylinder and then passing a current through to fuse the two ends. They are typically used for fencing, scaffolding and line pipes for fluis and gases.

44 bottom
LSAW
IMG_4467[1][1]_edited
SSAW
erwpipe
ERW

Contact

PT ESC Steel Indonesia

Graha Mustika Ratu, 5th Floor #505, Jln. Jend

Gatot Subroto Kav. 74-75, 
Jakarta 12870, Indonesia

T : +62 21 83709257 (office)

M : +62 811 980 376 (Zulfan)

M : +62 821 247 99468 (Chan Hon Kit)

E : chanhonkit@escpile.com

  • Grey LinkedIn Icon
  • Grey Facebook Icon
  • Grey Twitter Icon
  • Grey YouTube Icon
  • Grey Instagram Icon