ESC Tie Rod Systems
ESC offers full suite of tie back system options to enable economical solutions for projects. These are frequently used as part of a the ESC Piling Solution. ESC's experience spans from sheet pile applications, combination wall applications tied back to anchor or sheet pile walls. Components can be sourced as a full economical and hassle-free package: from Tie Rod Bars, to Couplers, to Eye Rods, Waling Beams and even all bolts and bearing plates.
ESC's engineers can provide all levels of support: from simple component specification from the catalogue, to full design works.
ESC offers the client a wide range of sizes and steel grades for Tie Rod System Assemblies. These can be seamlessly integrated into an ESC Sheet Pile or Combination Wall or other types of retaining wall. Corrosion Protection options are also available. ESC can offer the client a full design specification according conforming to the project requirements.
Tie Rod Ends - Cut Thread
Tie Rod Ends - Rolled Thread
Tie Rod Ends - Upset Thread
Tie Rod Connection Components
Waling Channel
The Waling Assembly transmits forces from the sheet piling to the anchorage whilst simultaneously aligning and stiffening the wall. ESC offers standard hot rolled channel sections presented, but can also provide full options such as splicing plates and bolt holes. Alternatives that ESC can accommodate to are cold formed channels, or double wide flange beams or as the client requires.
High Modulus Connections
ESC can design and fabricate a wide variety of Tie Rod connections for both King Pipe & H Piles that are easy to handle and install. Parameters required in the design of the connection are: preferred connection type, King Pile sizing and Tie Rod Bar sizing and strength. Presented are some typical designs but ESC can offer a full suite of options depending on the application and project requirements.
Corrosion Protection Options
Corrosion Protection of Tie Rod Systems can be achieved with the following methods or a combination of these methods. Other less common options include encapsulation, cathodic protection and Teflon coating all of which ESC can either provide or give advice on.
Other Components
-
Captive Nuts
-
Swivel Nuts
-
Angle Seating
-
Bearing Plates
-
Support Brakets
-
Tie Rod Spreader Beam
-
Washers
-
Spacers (for Z Piles)
Project Case Studies
