top of page
Sheet piles supply

ESC-CRZ Sheet Pile Series

Cold Rolled Sheet Piles

Cold Rolled Sheet piling has made a substantial progression in rolling technology and usage around the world. The ESC-CRZ Series is at the forefront of this development with  a series of high quality Z-profile sheet piles which provide an optimal strength to weight ratio. Interlocking clutches on the CRZ sheet piles are located at the outer fibre. This results in an optimized section profile for high strength and low material weight. A High Moment of Inertia reducing deflection improves on  serviceability requirements. A constant section thickness results in better driving stiffness. The wider profile width reduces handling and installation time with usual driving equipment. The wider profile reduces the number of interlocks required for a set wall run length, improving water-tightness capabilities.

ESC-CRZ Series
Section Modulus Range

​1100-5000cm³/m

Width Range (single)

​580-800mm

Thickness Range

​5-16mm

Production Standards

​BS EN 10249 Part 1 & 2

​Steel Grades
  • S235JR, S275JR, S355JR, S355JO

  • ASTM A572 Gr42, Gr50, Gr60

  • Q235B, Q345B, Q345C, Q390B, Q420B

  • Others available on request

Length

35.0m maximum but any project specific length can be produced

Delivery Options
  • Single or Pairs

  • Pairs either loose, welded or crimped

  • Lifting Hole

  • Grip Plate

  • By container (11.8m or less) or Break Bulk

  • Corrosion Protection Coatings

Corner Piles

ESC is able to offer 3 options for Corner Pile configurations in the ESC-CRZ Series. Option 1 is frequently used when the installation contractor prefers to create their own corner piles on site depending on the as-driven layout. However this produces wastage on the offcut pile. Option 2 allows welding at the mill or on site and provides the installation contractor with more flexibility on  corner pile location. Option 3 provides an option where no welding is required. Option 3 provides increased accuracy at corners that are deviated from the typical 90˚ corner.
 

Other Configurations

CRZ sheet piles can be fabricated to high modulus box piles, which can be used either in isolation or in a combi wall arrangement​.
 

Contact ESC - CRZ Sheet Piles

Technical Information

Technical Information

cold rolled sheet pile datasheet

Datasheets

CRZ drawings

Drawings

indonesia brochure.png

Product Images

Cold Rolled Z sheet piles in pairs
cold rolled sheet pile interlock
cold rolled sheet pile in pairs
Product Photos

Product Case Studies

bottom of page